High reliability
Wide range of use
Simple installation
Hydraulic grips are mainly used with test loads from 50 kN in combination with high clamping forces.
| Dimensions | ||
|---|---|---|
| FLAT | 0 – 8 mm 8 – 12,7 mm |
|
| ROUND | 3 – 7,8 mm 7,1 – 12,7 mm 12,4 – 18 mm |
|
Pneumatic clamps are particularly suitable for a wide variety of materials, especially those that are sensitive to clamping forces, with minimal changing effort. The clamping force is generated by pneumatic actuators acting directly on the grippers or via a lever system.
| Dimensions | ||
|---|---|---|
| FLAT | 0 – 8 mm 8 – 12,7 mm |
|
| ROUND | 3 – 7,8 mm 7,1 – 12,7 mm 12,4 – 18 mm |
|
Screw clamps are one-sided. The side screw is used to open and close the grips, and to apply the clamping force before the start of the test.
| Dimensions | ||
|---|---|---|
| FLAT | 0 – 8 mm 8 – 12,7 mm |
|
| ROUND | 3 – 7,8 mm 7,1 – 12,7 mm 12,4 – 18 mm |
|
The wedge-screw grips are designed for easy loading, alignment and positioning of specimens. After initial contact with the specimen, the gripping force increases as the test load increases.
| Dimensions | ||
|---|---|---|
| FLAT | 0 – 8 mm 8 – 12,7 mm |
|
| ROUND | 3 – 7,8 mm 7,1 – 12,7 mm 12,4 – 18 mm |
|
The manual wedge action grippers are designed to facilitate the loading, alignment and positioning of specimens. After initial contact with the test specimen, the gripping force increases as the test load increases.
| Dimensions | ||
|---|---|---|
| FLAT | 0 – 8 mm 8 – 12,7 mm |
|
| ROUND | 3 – 7,8 mm 7,1 – 12,7 mm 12,4 – 18 mm |
|
